FLAIL MOWER CONTRACTOR SERIES I – 2100 Mechanical side shift

$5,590 inc gst

Hayes Contractor Series I 2100 flail mower with mechanical side shift, 2100 mm cut and 30 hammer blades for 53–80 hp tractors. SKU 24080.

SKU: 24080 - 24070-M Capacity: 53-80hp Categories: ,
Hayes Contractor Series I 1500 mechanical side-shift flail mower in operation, SKU 24000
Hayes Contractor Series I 1500 mechanical side-shift flail mower in operation, SKU 24000
Hayes Contractor Series I 1500 mechanical side-shift flail mower in operation, SKU 24000
Hayes Contractor Series I 1500 mechanical side-shift flail mower in operation, SKU 24000
Hayes Contractor Series I 1500 mechanical side-shift flail mower in operation, SKU 24000
Hayes Contractor Series I 1500 mechanical side-shift flail mower in operation, SKU 24000
Hayes Contractor Series I 1500 mechanical side-shift flail mower in operation, SKU 24000
Hayes Contractor Series I 1500 mechanical side-shift flail mower in operation, SKU 24000
Hayes Contractor Series I 1500 mechanical side-shift flail mower in operation, SKU 24000
Hayes Contractor Series I 1500 mechanical side-shift flail mower in operation, SKU 24000
Hayes Contractor Series I 1500 mechanical side-shift flail mower in operation, SKU 24000
Hayes Contractor Series I 1500 mechanical side-shift flail mower in operation, SKU 24000
Hayes Contractor Series I 1500 mechanical side-shift flail mower in operation, SKU 24000
Hayes Contractor Series I flail mower – SKU 24000
Hayes Contractor Series I flail mower – SKU 24000

Description

Hayes Contractor Series I 2100 flail mower with mechanical side shift is designed for 53–80 hp tractors. It has a 2100 mm cutting width, 30 hammer blades, a 168 mm blade shaft, SKF bearings and Category 1 linkage. SKU 24080.

  • 168 mm (6.6 inch) diameter blade shaft for increased strength and superior balancing
  • Blade shaft runs on 50 mm dual-race SKF bearings with external access
  • 168 mm diameter rear roller running on 35 mm bearings
  • High-discharge design to increase ground speed
  • Spiral placement of cutting blades to maximise efficiency and reduce the power required to drive the mower
  • Extra-high cut setting up to 100 mm, useful in heavier conditions and areas where rocks or tree stumps may protrude from the ground
  • When fully side shifted to the non-belt side, the cut extends 1350 mm from the tractor centreline
  • When fully side shifted to the belt side, the cut extends 1150 mm from the tractor centreline

See sizing guide and comparison sheet below.

Hayes Contractor Series I 2100 mechanical side shift flail mower sizing guide, SKU 24080

* Please note – photo shown is of the Contractor Series I 1800.

Hayes flail mower comparison information for Contractor Series I 2100 mechanical side shift, SKU 24080

Specifications

Horsepower 53–80 hp
Cut Width 2100 mm
Cut Height 50–100 mm
Sideshift Mechanical
Blade shaft 168 mm
Qty blades 30
Std blades Hammer type
Belts 4 x B Section
Bearing SKF
Deck thickness 4 mm
Hitch pins CAT 1 (shim kit available for CAT 2)
PTO rpm 540
Overall width 2370 mm
Weight 644 kg
  • The PTO shaft is included in the price
  • The gearbox and shaft require oil. To ensure the unit is filled in the correct locations, to the correct level and with the correct oil, Hayes can fill it for $20 inc GST
  • The product is shipped in a steel frame to enable cost-effective freight, therefore some assembly is required
  • 12 months manufacturing warranty excluding consumables such as blades and belts, and 24 months gearbox warranty